DG Series Flush-Mount Thermal Mass Flow Meters provide accurate measurements by offering easy installation even in large-diameter pipes. Drill a hole in the pipe for connection and install the sensor. The wetted parts are made of AISI316 stainless steel, and the measurement range is 0 to 150 Nm³/h. The device includes real-time and total indicators and is pressure-resistant up to 40 Bar.
| Technical Specifications | |
| Interface | DN25…DN2500 |
| Measuring Range | 0-90/120/150 Nm/sn |
| Display | LCD, Instantaneous and Total Flow |
| Temperature | -40…+150 °C |
| Output | 4…20 mA ve Pulse |
| Accuracy | <±1,5 % |
| Supply | 24 VDC (Ops; 230 VAC) |
| Pressure | 16 Bar max. (Ops; 35 Bar |
| Protection | IP67 |
| Maintenance | Gas |
| Measuring Capability | 100:1 |
| Electrical Connection | RS485 or HART |
| Wet Parts | AISI 316 SS |
| Communication | ModBus |